20-Panel Modular PP Small-Animal Playpen – Translucent Black

Build a Custom Indoor Play Area Panel by Panel

Connect 20 translucent PP panels into a layout that suits your floor space, then dismantle and reconfigure it when your setup changes.

Benefits & Product Details

• 20-panel modular design
• Translucent black PP-resin panels
• ABS-style plastic connectors
• Stated panel formats: 13.7 × 13.7 inches and 13.7 × 17.7 inches / approximately 34.8 × 34.8 cm and 34.8 × 45 cm
• Solid lower panels can help contain debris
• Tool-free snap-together assembly
• Can be dismantled for storage or reconfiguration

How to Use & Care

1. Plan a layout with enough space for species-appropriate movement, hides and resources.
2. Connect every panel firmly and reinforce joints according to the supplied design.
3. Inspect for gaps, sharp connector edges and unstable walls.
4. Place only on a level indoor floor away from stairs, heat, cords and other hazards.
5. Supervise initial use and confirm the animal cannot climb, jump, chew through or push the pen.
6. Wipe clean, dry fully and replace damaged panels immediately.

Important: The old listing’s broad suitability and “over 20 square feet” claim are not relied on because assembled area depends on the layout and panel mix. This pen is not suitable for strong or active animals and is not child-, dog-, cat- or predator-proof.

What’s included: Twenty translucent black PP panels with plastic connectors and supplied assembly components as shown.

Frequently Asked Questions

What footprint will it make?

That depends on the panel sizes supplied and chosen layout. Plan using the listed approximate panel dimensions.

Can it house a rabbit or guinea pig permanently?

Do not assume so. Verify current species-specific space, wall-height, ventilation and enrichment requirements.

Can panels be stacked?

The source mentions multiple configurations, but load-bearing stacked use is not verified. Follow only the supplied assembly guidance.